The large-size formwork panel with birch face veneers
The basic construction of the Maxiform S-Twin is identical with the one of the Maxiform. However, with the S-Twin, the surfaces on both sides consist of two birch face veneers each. Due to the harder surface, the panel is more resistant and this reduces marks from reinforcement; and a higher number of utilisation can be achieved. The surface is also coated on both sides with 220 gr/m² phenolic resin coating. The inherently stable panel construction also here ensures homogenous behaviour during concreting as well as easy cutting of the panels.
Type of wood: 2 birch face veneers with poplar middle layer
Coating: on each side 220 gr/m² phenolic resin coating (Dynea), dark brown Bonding: wbp-bonding
Application: mainly for utilisation in concrete prefabrication factories, especially as an alternative to blockboard and laminboard panels
| Nominal Thickness |
Dimensions |
Weight |
Packaging Unit |
| 21 mm |
2000 x 5400 mm |
12,60 kg/m² |
20 pieces |
The cost-effective large-size formwork panel
The Maxiform formwork panel is our alternative to blockboard or laminboard panels, with the advantages of a veneer plywood panel: high dimensional accuracy, evenly-spread stability as well as good processibility. This panel is mainly used in concrete prefabrication factories. The wbp-bonded formwork panel consists of poplar plywood throughout and is coated on both sides with each 220 gr/m² phenolic resin coating.
Type of wood: poplar plywood throughout
Coating: on each side 220 gr/m² phenolic resin coating (Dynea), dark brown
Bonding: wbp-bonding
Application: mainly for utilisation in concrete prefabrication factories, especially as an alternative to blockboard and laminboard panels
| Nominal Thickness |
Dimensions |
Weight |
Packaging Unit |
| 21 mm |
2000 x 5400 mm |
11,18 kg/m² |
20 pieces |
